JEFFTRON LEVIATHAN AIRSOFT MOSFET EVO3 FOR ASG EVO

Description:
The Leviathan - EVO3 is a processor-controlled MOSFET with wireless communication.
It adds new firing modes, controls rate of fire, pre-cocking, active braking, low battery indication and statistics…
Everything is controlled via a smartphone application (iOS and Android).
The device is fully integrated into the ASG EVO3 gearbox , replacing the original electronics.
It retains all the functions of the original electronics: empty magazine detection, slide stop, burst firing, battery undervoltage protection, etc.
Comes with fully pre-made cables on the front with DeanT connector; no soldering is required.

MAIN FUNCTIONS:
- Adds new independent firing modes for each position on the fire selector (SEMI - BURST - AUTO)
- Three adjustable bursts (range 2 to 20 shots)
- Rate of fire can be reduced to 40%. It adds pauses between shots to reduce RoF. It provides fast trigger response even at a very low rate of fire, just like in a real weapon
- Included in the package is the ARL mode set to make an anti-reverse lock that allows to use pre-arming, lower level active braking and DSG gears
- Adjustable active braking force (can be disabled with ARL mode installed)
- Pre-cocking function for instant firing on SEMI shot (can only be used with ARL mode installed)
- The bolt locking lever must be pulled after connecting the battery, which simulates loading the bullet into the barrel like in a real gun
- The empty magazine sound indication and the slide locking lever can be disabled in the app
- Delay between shots adds time during which it is not possible to shoot, it simulates weapon reload delay or recoil (range 0.1 to 4.0 seconds)
- Electronic fuse sensitivity set for high current detection to prevent damage in case of problem
- Low battery indication for 2S - 4S li-pol and 3S - 4S li-fe
- Statistics screen displays firing output with cycle time, motor current draw, firing rate and MOSFET temperature. Allows fine tuning of gearbox upgrade
The app displays the actual battery voltage. The colored lines indicate the battery charge status.
. The user can save multiple settings under profiles.
The update feature fixes bugs and adds new features to the device.
There are three shot counters. Total count of each shot over the lifetime of the device. The user counter can be reset by the user at any time. The power-up counter is reset by connecting the battery.
The error log displays errors made during the lifetime of the device.
. For better security, wireless connection can be disabled by the selector (can be disabled)
The Leviathan - EVO 3 monitors current, voltage and temperature to prevent damage if something goes wrong.
The motor vibrates and beeps as feedback to the user
. The programmed settings are saved in the Leviathan - EVO 3's memory immediately after they are changed, so the settings are not lost when the battery is disconnected or the connection with the smartphone is lost.

FIRING MODES:
Independent for each position of the firing selector (SEMI - BURST - AUTO)
- SAFE: no response to the trigger.
- Semi: it fires one shot per trigger.
- Semi/BurstX: Short trigger press fires a single shot, long trigger press fires a burst.
- Binary Trigger: Fires a single shot when the trigger is pressed and another single shot when it is released.
- BurstX: The pistol fires a burst of fire per trigger pull.
- BurstX+BurstY: a short trigger press triggers burstX, a long trigger press triggers burstX+burstY.
- BurstX/Full: A short trigger press triggers burstX, a long trigger press triggers full auto fire.
- Full: The pistol fires automatically until the trigger is released.

TECHNICAL SPECIFICATIONS:
- Easy installation inside the ASG EVO 3 A1 gearbox version
- No modifications are needed in the gun or Leviathan - EVO3
- Compatible with Scorpion EVO 3 - A1, Scorpion EVO 3 - A1 BET, Scorpion EVO 3 - A1 rifle with gen.1 gearbox, 2018 version and 2020 version
- Compatible with CNC stock and trigger
- ARL Mode Installation: With the anti-reverse latch, you can use pre-cocking, lower level active brake and DSG gears
- It uses a microswitch actuated by a sector gear for perfect semi- and burst firing timing
- Thanks to advanced electronics, Leviathan - EVO 3 can be used with any common gearbox upgrade and rate of fire
- Fully executed wiring allows for the fastest and easiest installation in the gun, it is long enough for all types of weapons with front-mounted battery. No soldering is required
- There are high quality 1.5 qmm (AWG16) wires with thin and hard MPPE insulation
- The outer diameter of the wire is only 2.06 mm
- The card is covered with a conformal coating, it protects Leviathan - EVO3 against water
- Specified for common batteries up to 17V (Ni-xx 8.4 - 12V, Lipol 7.4 - 14.8V)
- The device increases the rate of fire of the pistol and the battery lasts longer than with basic wiring
- With active braking enabled, the piston is not partially extended, the spring is fully released, the mechabox parts are not under tension, and the nozzle locks the hop-up chamber largely (ROF dependent)
- In very high rate of fire (ROF) weapons, the active brake resolves multiple shots in semi-automatic mode
- The braking effect is most powerful with a high-torque motor
- Remove from gearbox: cut the lever, store the electronics, you won't need them with the Leviathan - EVO 3

USE WITH BRUSHLESS MOTOR:
- The Leviathan can be used with a brushless motor (Warhead, Option #1, etc.)
- Activate the "Brushless Motor" function in the Leviathan app and use all available options without any worries