Product out of stock? Write to us or register it with the button above: we can order it for you and contact you as soon as it's available!

Skip to product information
1 of 2

AVOCADO MOSFET BURST PROGRAMMABLE BURST AIRSOFT AEG Ver III

AVOCADO MOSFET BURST PROGRAMMABLE BURST AIRSOFT AEG Ver III

Regular price $30.00 CAD
Regular price Sale price $30.00 CAD
Sale Sold out
Shipping calculated at checkout.

Low stock: 1 left

Quantity

Features

  • User-friendly online programming - User can program the AEG at any time by simply using the trigger
  • Programmable number of shots from 2 to 12
  • Programmable shooting mode for up to 30 shots
  • Equipped with low battery protection
  • Equipped with the latest power MOSFET technology
  • Active braking technology used
  • Audible beeps are available to confirm programming and indicate low battery.
  • Automatic battery condition adjustment to suit different battery types

Add burst capability to virtually any Airsoft AEG in seconds! The Burst Avocado gives you reduced gearbox wear, better trigger control, and tactical advantages! The Burst Avocado is version 2 of our previously released Burst Wizard, with easier tuning, MOSFET technology, and real-time burst firing!

The "Burst Avocado" is equipped with a low battery detector. Two pre-installed thresholds (6.3 V and 9.3 V) allow for a wide range of battery voltages. The device detects the initial voltage when the battery is connected and determines the threshold to use. When the battery drops below the preset threshold, the device beeps and stops firing while the trigger is being pulled. This is especially useful for LiPo batteries, as they should not be completely discharged.

Manufacturer: Avocado Airsoft USA

Features:

Connector Type: Standard Deans
Size: 45mm x 17mm x 8mm
Operating voltage: 7.2 to 12 V
Maximum continuous current: 65 A
Recommended operating battery type: 2-3 cell Li-Po (7.4-12V)
Programmable “Burst” mode: 1 to 12 shots
Programmable “continuous” mode: 30 shots
Low battery detection: 6.6 to 9.9 V
*If your AEG's rate of fire is higher than 25, there will be a +1 shot inaccuracy. For example, a 2-trigger pull setting for a 3-shot burst, etc.

Use ONLY the following battery types with Burst Assist:

  • NiMH: 7.2V (6 cells), 8.4V (7 cells), 10.8V (9 cells), 12V (10 cells)
  • LiPo: 7.4V (2 cells), 11.1V (3 cells)



  • DO NOT USE NiMH 9.6V (8 CELL) WITH THIS MOSFET UNIT

    View full details